Add items to your Hire List to send to our team for pricing. We respond to enquiries within one working day.
Luminex - Ethernet To DMX8 Node (MK II) Front rightLuminex - Ethernet To DMX8 Node (MK II) Front right

Luminex – Ethernet To DMX8 Node (MK II)

Luminex

Ethernet node that serves eight DMX512 outlets, compatible with the Artnet and sACN protocols. All outlets are conform to DMX512-A and can be used as input or output.

SKU: MLECONENDMX8 Categories: , ,

Description

The Ethernet-DMX8 MkII is an Ethernet node that serves eight DMX512 outlets, compatible with the Artnet and sACN protocols. All outlets conform to DMX512-A and can be used as input or output.

The two Ethernet links on the front and at the rear are 10/100BaseTX connections on Neutrik RJ45 Ethercon connectors. The Ethernet-DMX8 MkII embeds a built-in switch fabric which allows you to use the converter as an Ethernet repeater.

All configuration can be done over Ethernet through a build in Web site. This all comes in a 19″ 1 unit high metal housing that can be rack mounted.

Connections

  • 2 x 10/100BaseTX Ethernet connections on shielded Neutrik RJ45 Ethercon connectors
  • 8 x DMX512-A in/outputs on shielded and isolated gold plated 5 pin female XLR, with termination (DMX512-A)

Features

  • DMX routing, universe setting
  • Input and output enable / disable
  • DMX output frame rate setting
  • Supported protocols: DMX, DMX512-A, RDM, Art-Net™, sACN
  • Protocol selection per port
  • IP settings
  • Unit ID and labeling
  • Ethernet activity indication on front panel
  • Up to 40 programmable profiles and routings
  • Up to 10 predefined profiles (splitters, mergers…)
  • Multi language Web interface

Operation

  • Ethernet <-> DMX conversion
  • Ethernet and DMX Merger
  • Ethernet and DMX Backup
  • DMX splitter / booster
  • DMX trigger. Remote selection of the control source
  • Built-in DMX softpatch
  • Wysiwyg enabled. DMX inputs can be visualised in Wysiwyg
  • DMX snapshot. Capture 3 fixed lighting states per outlet
  • Modification of captured values from the Web interface
  • Auto-load capture on boot-up (ideal for expo)

Additional information

Connectivity

DMX: 8 x shielded & gold plated Neutrik 5 pin XLR (female)
Network:
2 x 10/100Mbps Neutrik RJ45 Ethercon connectors
One on the front and one at the rear
Power: 1 x IEC inlet with fuse holder
Option: 8 x Punched holes at the rear for optional connectors
DMX Features

Supported Protocols: DMX512 (1986 & 1990), DMX512-A, RDM ANSI E1.20
DMX Port Direction: Input or output (configurable)
DMX Port Isolation: Optic and galvanic isolation per port
DMX Port Termination/Biasing: Yes
DMX Timing: Framerate: 10-40fps / Break: 176-352µs
Ethernet Features

Supported Protocols: Art-Net™, sACN ANSI E1.31
Port Speed: 10/100BaseTX
Port Sensing: Auto-negociation, MDI/MDIX
Additional Features

Monitoring Software: LumiNet Monitor V2 at no cost
Wysiwyg Enabled: Yes (visualize inputs)
Status Report

Graphic Display & Jog : Settings informations (IP address, netmask, outlet settings…)
Ethernet Port Connection: Link and activity
Power: LED indication
Power

Power Input:
90-260 VAC
47-63 Hz
Power Consumption: Maximum 20 W
Fuse: 1A 250V Slow Blow
Environmental

Operating Temperature: 0 to +60 °C
Storage Temperature: -10 to +70 °C
Humidity: 5-95% non-condensing
Physical

Enclosure: Metal housing
Dimension (W x D x H):
482 x 183 x 44 mm
18,97" x 7,2" x 1,73"
Weight: 2.3 Kg
Packaging (W x D x H): 520 x 235 x 50 mm
Additional informations

Approvals: CE, EN 55103-1, EN 55103-2, EN 60950-1, RoHS Compliance
Order References:
Ethernet-DMX8 MkII:
LU 01 00037
Ethernet-DMX8 MkII with PoE module:
LU 01 00037-POE
Optional PoE Module:
LU 01 00046 (Complies only with units from serial Lum0370201)
Note: Luminex LCE operates a policy of continuous development.
Luminex LCE reserves the right to make changes and improvements
to any of the products described in this document above without prior notice.
Specifications are subject to change without notice.

Downloads

Data Sheet Download
User Guide Download